Ferrite Block Magnet - 25mm x 11mm x 6mm

More Information
Product Code 12120
Pull Force* 0.65 kg
Weight 8 gm
Style Ferrite block magnet
Grade Y30BH
Gauss 1995
Direction of Magnetisation Axially magnetised
Dimensions Width: 11mm
Height: 6mm
Length: 25mm

*Measured against up to 10mm mild steel.

Rating:
100% of 5
$0.64 1 to 999 items
  • $0.46 buy 1000 to 9999 items and save 28%
  • $0.35 buy 10000+ items and save 45%
_ +
In stock
Prices are GST inclusive - Australia only.
Volume pricing available on request.

Magnet Dimensions

Magnetic Product Description:

This ferrite block magnet has a 25mm length, an 11mm width and a height of 6mm. With a magnetic flux reading of 1995 Gauss this block magnet is identified by the AMF magnet part number 12120.

Uses for our ferrite block magnets:

Installers of marble and granite or synthetic stone materials locate, cut, fit and secure the material with a variety of fastening methods. Magnets like these ferrite block magnets, 25mm long x 11mm wide and 6mm in height are sometimes embedded at the point of manufacture in kitchen benchtops, bathroom vanities, steps and other platforms as an alternative to glueing or screwing where desirable.

Stone, natural or man-made, is prized for its brilliance and variety of colours. Durable and resistant to staining, these smooth monolithic surfaces are non-porous, easy to clean and require little or no maintenance. However, installed where hygiene, infection and contamination standards are necessary to conform to health and safety rules, magnets provide a peerless method of fastening and releasing.

For kitchens and bathrooms and work surfaces in restaurants, hotels, hospitals and laboratories regular cleaning and sterilising procedures demand a fastening system that is both permanent and removable. Ferrite block magnets embedded in componentry including stone materials of all kinds offer a secure and permanent hold until the desired pull or release force is applied to allow disassembly.

Component parts and the structures that support them are then subject to thorough inspection and cleansing. Magnetic engagement allows for fuss-free reassembly in quick time, reducing the costs involved in regular cleaning chores.

Magnets connect by bond rather than tie, avoiding as far as possible piercing the materials where moisture accumulation can promote the growth of bacteria. Ferrite block magnets, permanent and removable, provide a hidden or secret fixing system desired by many clients and offer an adjustable fastening method, unlike masonry glue. This method allows for minor adjustments during the installation process, shortly afterwards, or substitute for a replacement piece of stone without too much waste or drama.

Customer Reviews
  1. Have used these blocks before so I knew what i was getting
    Rating
    100%
    I use these Ferrite Blocks in model aircraft building. I use them on a steel building board to hold down the Balsa parts in the correct position on the plan while the glue dries. The traditional way is to use a soft board and hold the parts in place with pins, this way there are no pin holes in the wood. They can also be used to hold parts square to the building board by using a magnet either side of the part.

    Review by

    Posted on

  2. Exactly as discribed
    Rating
    100%
    These magnets were bought to use for holding balsa parts of a model airplane in positon on the steel building board while the glue dried. They are great for this.

    Review by

    Posted on

Write Your Own Review
You're reviewing:Ferrite Block Magnet - 25mm x 11mm x 6mm
Your Rating
Copyright © 2019 AMF Magnetics. All Rights Reserved.