Ferrite Block Magnet - 50mm x 19mm x 4.9mm

More Information
Product Code12041
Pull Force*0.97 kg
Weight22 gm
StyleFerrite block magnet
GradeY30BH
Gauss1988
Direction of MagnetisationAxially magnetised
DimensionsWidth: 19mm
Height: 4.9mm
Length: 50mm

*Measured against up to 10mm mild steel.

$0.83 1 to 999 items
  • $0.62 buy 1000 to 9999 items and save 25%
  • $0.50 buy 10000+ items and save 40%
In stock
Prices are GST inclusive - Australia only.
Volume pricing available on request.

Magnet Dimensions

Magnetic Product Description:

This ferrite block magnet has a 50mm length, a 19mm width and a height of 4.9mm. This ferrite magnet has a magnetic flux reading of 1988 Gauss and a pull force of approx 500 grams. It is identified by the AMF magnet part number 12041.

Uses for our ferrite block magnets:

Smaller ferrite block magnets are commonly used in DC motors, as sensors and in various hand crafts. Any machining of ferrite blocks must be done with a diamond wheel, ideally before magnetisation, as they are hard and brittle. 

Write Your Own Review
You're reviewing:Ferrite Block Magnet - 50mm x 19mm x 4.9mm
Your Rating
Copyright © 2019 AMF Magnetics. All Rights Reserved.