Product code: 93201
Prices are GST Incl.
Volume pricing available on requestAustralia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
This Rare Earth disc has a diameter of 6mm and a height of 2mm. It has a magnetic flux reading of 3356 Gauss and a pull force of 500 grams. It is identified by the AMF magnet part number 93201.
Metal separation, picking up nails & screws, water conditioning, building generators, magnetic stirrers, metal detectors, holding, magic tricks, and brochure closures.
I ordered the wrong size magnet for my needs - my bad. Luckily AMF magnets are very competitively priced and arrive so quickly that I could easily afford to order more of the bigger size.
Top Quality Product, Excellent Service, Fast Dispatch ✅
Clearly labelled exactly as described
is this magnet strong enough to open yondr pouches , used to lock phones?
The N D Magnets were perfect for the job I had purchased them for.
Thank you.
| Quality |
Rated 5 out of 5
|
|---|---|
| Ease of Use |
Rated 5 out of 5
|
| Value |
Rated 5 out of 5
|
| Strength |
Rated 4 out of 5
|
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
The Pull Force listed for each magnet is based on lifting 10mm thick steel from a horizontal surface. Magnets on a vertical surface (of 10mm thick steel) are generally able to hold around only 30% of the pull force listed in the product description. This is due to the effects of gravity and the lack of friction between the surface and the shiny magnet. Read More
