Product code: 59146
Australia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
These red pre-cut magnetic labels have a width of 100mm, a length of 200mm and a thickness of 0.8mm. Our magnetic labels with a red PVC coating are constructed from Strontium or Barium ferrite powder within a polymer matrix. They are identified by the AMF Magnetics part number 59146.
These flexible red magnetic labels can be affixed with magnetic bond to prominent positions on electrical cabinets of homes and businesses as well as water tanks and pipes. Red means caution or danger. On the labels of these magnets, instructions relating to issues such as the circuit breaker switch or fuse wire can be recorded with the use of a white board marker.
For plumbing apparatus, these magnets will wrap around a water tank if desired or could be affixed to gas hot water units for instructions relating to pilot light or re-lighting procedure.
Alternatively, the first names and emergency phone numbers of local tradesmen could be written on the label with instructions to telephone them immediately. As names and numbers change, a simple cloth will erase the redundant information from the surface of these labels so current details can be recorded.
Clear and accurate communication is very important in relation to water and power and gas issues wherever these services are encountered. Red colouring indicates to almost everyone to proceed with caution.
The beauty of these magnetic labels is their ease of use. A secure, permanent grab, then an easy peel away remove with no residue or spoiling to the surface of any kind. Due diligence comes in many forms. In this case, due diligence comes in the form of red magnetic labels.
Our pre-cut magnetic labels are the best way to organise and mark your items, shelving and stock. These labels can be stamped, slit, punched and laminated, and provide a write-on wipe-off label surface for shelving and racking at your factory, office or home. Our magnetic labels can be applied to flat and curved surfaces.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
NB: Ranges are indicative for product category, please check individual products for specific values within that range.
The Pull Force listed for each magnet is based on lifting 10mm thick steel from a horizontal surface. Magnets on a vertical surface (of 10mm thick steel) are generally able to hold around only 30% of the pull force listed in the product description. This is due to the effects of gravity and the lack of friction between the surface and the shiny magnet. Read More
