Adhesive Magnetic Tape Product Description:
Our Magnafix range of Magnetic Tape uses heavy-duty adhesives for adhesion to acrylics, steel, aluminium and other hard to adhere to surfaces. This Magnafix magnetic tape has a width of 25mm and a thickness of 1.6mm. This tape comes in a 30-metre length roll. It has a 3M 9448 adhesive on one side. Identified by the AMF Magnets part number 59029A. This product's corresponding PART B can be found here.
**This product is not recommended for use with large sheets of perspex thicker than 6mm.
Uses for our Magnafix Magnetic Tape:
Magnafix magnetic tape has a 3M adhesive that is protected by a peel away backing until fixing is required. This strong flexible magnetic strip tape can be easily cut using scissors or a sharp blade to accommodate a wide range of screens and windows.
This Adhesive Magnetic Strip provides a safe and secure method of holding fly screens and soundproof panes to the inside or outside of windows. This method of fastening allows for the simple release and re-attachment of insect or sound screens. **Flyscreens without a frame will require extra adhesive to bond, or product will fail.
Magnafix magnetic tapes offer an excellent solution for fixing or joining graphic elements to either magnetic or non-magnetic surfaces for display systems and signage. Create magnetic photographs, posters, business cards and more. For using this magnetic product for lightbox signage please use our Magnafix Tape with a TESA 4965 adhesive.
Click here for our Magnafix Directions of Use.
Magnafix directions for use on Metal surfaces:
For this application, you can use either A or B Magnafix tape, this application is for use where one surface is metal that has magnetic properties.
-
Clean the surface where you want to attach the Magnafix tape with an alcohol wipe before you apply the tape.
-
Cut the Magnafix tape to the required length, peel off the adhesive cover, and apply to the non-metal surface.
-
Press the Magnafix tape firmly to the surface and make sure the tape sticks firmly and is ready to use.
Magnafix magnetic tape on two non-magnetic surfaces:
You will need to use both A and B Magnafix tape, this application is for use where both surfaces are non-magnetic, including plastic, wood, aluminium and paper. This magnetic tape is ideal for fixing screens to window or door frames, or for displays, banners and general signage.
-
Clean surface with an alcohol spray or wipe.
-
Cut the required length of Magnafix tape A (un-grooved), peel off the adhesive cover and press firmly onto the non-metallic surface to form a strong bond. Start with the most fixed part of the project, such as a window frame or fixed attachment surface.
-
Cut the same length of Magnafix tape B (grooved) and apply the magnetic side of the tape to the opposite pole of the magnetic (part A) tape you have already applied on the frame/attachment surface. You will now have two magnetic surfaces attached to each other.
-
Now peel off the adhesive backing on the second piece of tape so that the adhesive side is facing towards you.
-
Apply the other surface (Acrylic/Perspex sheet) to the tape and press firmly.
-
Allow the bond to set for 5-10 minutes.
-
You should now have two non-magnetic surfaces attached to each other by the magnetic tape.