Very good product
All good i am happy
Quality |
Rated 5 out of 5
|
---|---|
Ease of Use |
Rated 5 out of 5
|
Value |
Rated 5 out of 5
|
Strength |
Rated 5 out of 5
|
Product code: 59080MC
Australia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
This white magnetic sheeting has a width of 620mm and a thickness of 0.8mm. This magnetic sheeting has a white glossy PVC coating. White side is non-magnetic. It is identified by AMF Part Number 59080MC. Our range of white sheeting is suitable for commercial CMYK ultraviolet (UV) curable printing. Available by metre if required, please contact the office.
Please note: This is a per metre product, however, orders with a quantity greater than 1 will come as a continuous length (ie. purchasing 3 of this product, will come as a 3-metre length of 59080MC).
If you wish to receive your order in a 1-metre pre-cut length please use a different part number here: 59080M
If used as car signage or protective panelling on your vehicle, ensure to remove this product at least once a week. Clean the surface of your car and the back of the sheeting to prolong its longevity. Always remove before washing your car.
Our white magnetic sheeting comes in a variety of thicknesses, widths, lengths (by the roll or per metre), and is constructed from Strontium or Barium ferrite powder within a polymer matrix. This white magnetic sheeting is manufactured to provide good demagnetisation resistance & reasonable resistance to chemical agents. It can be stamped, slit, punched or laminated, providing a superior product for magnetic signs at your office, warehouse or home. It can be easily cut with guillotine, scissors or Stanley knife.
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
NB: Ranges are indicative for product category, please check individual products for specific values within that range.
The Pull Force listed for each magnet is based on lifting 10mm thick steel from a horizontal surface. Magnets on a vertical surface (of 10mm thick steel) are generally able to hold around only 30% of the pull force listed in the product description. This is due to the effects of gravity and the lack of friction between the surface and the shiny magnet. Read More