Product code: AMFYPA25
Australia's Leading Supplier
Shipping Worldwide*
30 Day Returns
Same Day Dispatch*
This Countersunk Pot Magnet is made from a powerful Rare Earth magnet encased in a mild steel, nickel coated holding pot. The metal casing provides for superior durability, allowing the brittle magnet within to withstand impact and corrosion to a greater extent. This product has a diameter of 25mm, a countersunk hole diameter of 5.5mm and a thickness of 8mm. This super-strong holding magnet has a pull force of 14kg and a weight of 23 grams.
This Countersunk Neodymium Magnet is widely popular due to its versatility and multitude of applications. These handy 25mm pot magnets are suitable for builders and tradespeople or DIY home improvement. These industries prefer Countersunk magnets as they are high quality, high strength and multi-purpose.
The countersunk hole in the centre is specifically designed for screws. This means the magnet can easily be secured in place with a simple screw. This magnet can be secured to any magnetic or non magnetic material. From wood to plastic, the options are endless! Create magnetic door latches, tool holders or use this magnet as a part of a complex mechanical arrangement.
| ModelNo. | DØ | D1Ø | D2Ø | H | Holding force(kg) | Weight (g) |
| AMFYPA16 | 16 | 3.5 | 6.5 | 5 | 5 | 7 |
| AMFYPA20 | 20 | 4.5 | 8.5 | 7 | 6 | 13 |
| AMFYPA25 | 25 | 5.5 | 10.4 | 8 | 14 | 23 |
| AMFYPA32 | 32 | 5.5 | 10.4 | 8 | 25 | 39 |
| AMFYPA36 | 36 | 6.5 | 12 | 9 | 29 | 52 |
| AMFYPA42 | 42 | 6.5 | 12 | 9 | 37 | 76 |
| AMFYPA48 | 48 | 8.5 | 16 | 11.5 | 68 | 120 |
| AMFYPA60 | 60 | 8.5 | 16 | 15 | 112 | 252 |
| AMFYPA75 | 75 | 10.5 | 19 | 18 | 162 | 488 |
They are superb, I have countersunk 11 of them into a beautiful piece of red gum which I will hang my knives onto the 11 magnets which will be mounted on the wall in my kitchen. Great service from the staff
Very suitably for purpose.
Seems ok at this point, i have purchased this type before
Needed some way of attaching disco LED lights to the steel beam over the dance floor of the club rooms we had hired - something that was secure, but easy and quick to remove at the end of the night “clean-up”. These did the trick perfectly! Thanks 😊
| Quality |
Rated 5 out of 5
|
|---|---|
| Ease of Use |
Rated 5 out of 5
|
| Value |
Rated 5 out of 5
|
| Strength |
Rated 5 out of 5
|
Easy to fit and works well
| Quality |
Rated 5 out of 5
|
|---|---|
| Ease of Use |
Rated 5 out of 5
|
| Value |
Rated 5 out of 5
|
| Strength |
Rated 5 out of 5
|
No FAQ available
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
The Pull Force listed for each magnet is based on lifting 10mm thick steel from a horizontal surface. Magnets on a vertical surface (of 10mm thick steel) are generally able to hold around only 30% of the pull force listed in the product description. This is due to the effects of gravity and the lack of friction between the surface and the shiny magnet. Read More
